The Pulsar is our zero light designer space heater which can be suspended from high ceilings. The Pulsar will directly warm people below the heater and so can be used in applications such as reception areas, restaurants and public areas. When used in smaller enclosed spaces such as hallways Pulsar will heat the zone and the room itself.
Pulsar is made in Ireland from high quality materials and is completely maintenance free. The heater takes around 10 minutes to warm up and should be used in conjunction with IQ controls.
The black Pulsar is higher power and more effective for space/zone heating applications. The white Pulsar is relatively low power and more suited to heating smaller rooms or as a supplementary heater to existing systems.
The white Pulsar is 1800W and will heat an enclosed indoor area of 8 – 15m2 from a height of up to 2.5m . The Black pulsar is 2400W and will heat enclosed indoor areas of 12-20m2 from a height of up to 2.8m. These areas are a guideline only and will be impacted by airflow and ambient temperatures. Dependent upon the property age/type, insulation levels and levels of airflow present, the number of heaters required and running times will vary. For larger domestic or commercial projects we recommend Herschel carry out a survey or detailed desktop assessment.
Key Features:
-
Zero light contemporary design
-
Black or white steel body
-
High power ceramic elements
-
Manufactured in Europe
-
Ideal for hallways & staircases
-
Use with Herschel IQ controls
Technical Specifications
Surface: Black or White enamelled steel
Heating element: Ceramic heating elements
Voltage: 230 Volt, 50 Hz (Power supply must not exceed 245 volts as this will void the warranty).
Cable: 1.5m power cable
Electromagnetic tolerance: Low emission
Protection class: IP 20 (Installation)
Certificates and Reports: CE
Guarantee: 12 months (excludes any cost of installation or consequential losses)
Colours:
Black (2400 Watts) or White (1800 Watts)
Installation:
Hanging System: This unit is for ceiling mounting only and must be installed beyond the reach of people due to the high surface temperature.
Heated Zone: 8-15m2 (1800W) and 12-20m2 (2400W)
The heater will directly warm people and objects within the Heated Zone (note: air movement may reduce area coverage). Within enclosed areas the thermal mass of the building will also be heated within the entire zone. Dependent upon the property age/type, insulation levels, number of heaters used and running times this will increase the ambient temperatures. For larger commercial projects or where different mounting heights are required we would always recommend Herschel carry out a survey or detailed desktop assessment.
Quality & Safety
IEC 60335-1; 60335-2-30 Electrical & Construction Safety Tested
AS/NZS 60335-1; 60335-2-30 Electrical & Construction Safety Compliant
RoHS compliant
Guarantee: 12 months (excludes any cost of installation or consequential losses)
